Level Switch – Model L-21
Water Level Control in:
- Cooling Towers
- Plating Tanks
- Washing Tanks
- Reverse Osmosis
- Fish Farms
- Fountains & Pools
- Aquariums
|
L-21+ & L-21N (NORYL®) WORKING PRESSURE: 250 psi max. continuous WORKING TEMPERATURE:180˚F max. continuous. WETTED MATERIALS: Float and Bushing: Noryl® (PPO) (10% glass fibers) screws + shaft: 316 stainless steel or Teflon® |
|
L-21VCR (FORTRON®) WORKING PRESSURE: 250 psi max. continuous WORKING TEMPERATURE: 200˚F max. continuous. WETTED MATERIALS: Body, Float and Bushing: Fortron® (PPO) (40% glass fibers) screws + shaft: HASTELLOY® C |
| L21 Group |
| L-21N L-21VCR |
HYSTERESIS (Δ LIQUID LEVEL TO ACTIVATE/DEACTIVATE SWITCH)
≈ 5″ max. travel (N/VCR).
ELECTRICAL SWITCH CHARACTERISTICS
SPDT (single pole double throw) 15 A, 1/2 hp @ 125 or 250VAC .A @ 125VDC, .A @ 250VDC 4A @ 125VAC (Tungsten lamp load)
Note: Model L-21 employs magnetic coupling between float arm and switch body. Magnetic particles can accumulate on and around magnet housing which may affect proper operation. Please conduct appropriate fluid magnetic particle evaluation and operational tests prior to and during installation and use.
WORKING FLUID SPECIFIC GRAVITY
0.7 minimum
L-21N
- Acetic Acid
- Ammonia Liquid 10%
- Chlorinated Water (Potable)
- Ethylene Glycol
- Glycolic acid
- Hydrochloric acid 20% – 37%
- Hydrofluoric acid 20%
- Hydrogen Sulfide Aqueous
- Mineral Oil
- Nitric Acid 10%-50%
- Phosphoric Acid 40%-100%
- Plating Fluids & Baths
- Sodium Hydroxide Solution 20%
- Soy Sauce
- Sulfuric Acid 10%
- Vinegar
- Water Distilled
- Water Fresh
- Water Mine Acid
- Water Salt
- Whiskey & Wine
L-21CR
- Acetic Acid
- Ammonia Liquid 10%
- Benzene
- Diesel Fuel
- Ethylene Chloride
- Ethylene Dichloride
- Ethylene Glycol
- Glycolic acid
- Hydrogen Sulfide Aqueous
- Lubricants
- Mineral Oil
- Phosphoric Acid 40%-100%
- Propylene Glycol
- Sodium Hydroxide Solution 20%
- Sulfuric Acid 10%
- Water Distilled
- Water Fresh
- Water Mine Acid
- Water Salt
- Xylene